OVENS MOD. EASY PIZZA : P134H-P150H-P234H-P250H Pag. 4 / 4
MANUALE ISTRUZIONI
Forni Elettrici Professionali mod.
“EASY PIZZA”
Release
02 - 2014
INSTRUCTIONS MANUAL
Professional Electric Ovens Line
“Easy pizza”
Release
01 - 2015
OVEN CLEANING
If the oven is dirty inside, the baking times can be longer than usual. A frequent cleaning avoids formations of smoke and bad smells during the baking.
Before whichever cleaning always remove the plug from the electrical socket. Never dip the appliance in water; do not wash it under a water jet, it
can compromise the electrical safety of the oven!!!!. For the cleaning of the external surface always use a humid sponge. Avoid to use abrading
products that would damage the varnish. Pay attention that water or liquid soap don’t penetrate inside the oven embrasures. For the cleaning of the
internal side of the oven never use corroding products (spray detergents) , do not scrape the walls with point shaped or cutting objects. Never clean the
resistances. IMPORTANT: FOR YOUR SAFETY THE CLEANING MUST BE DONE ALWAYS WITH COLD OVEN!
PACKING AND DISPOSAL
All the materials used for packing are compatible with the environment and can be recycled. Correctly dispose of any refuse, such as the packing
materials, by placing them in the proper waste bins, so to avoid any environmental pollution.
PLEASE KEEP OVEN PACKING BOX. Please give your contribution to the environment conservation. The appliances that are no more used or are not
usable are not refusals worthless. Through the ecological disposal, various materials employed in the production of your equipment can be recovered.
Take information about actual disposal possibility by your specialized retailer, or by your district Administration. Before disposing your equipment, cut
the power supply cable and let it be unsuitable. BEFORE CUTTING THE CABLE REMOVE THE PLUG FROM THE CURRENT!
GUARANTEE CONDITIONS
The appliance is covered by trading GUARANTEE for a period of one year from the purchase date. The validity of the GUARANTEE always must be
proven from a fiscal document (fiscal buying document, transport documents or invoice) and covers exclusively all the components which result to be
defective from the origin caused by fabrication defects. The manufacturing defects that are manifested within six months from the delivery, excluding
contrary proof or incompatibility with the nature of the good, are presumed already existing at the date of the delivery.
Therefore there are excluded all the parts that have got accidental damages or that they are subject to usury, defects deriving from not professional use
of the appliance, the cleaning and repair of the refractory stone (the refractory stone, if used, is never considered under guarantee) negligence in using
or in the maintenance, transport damages and all those damages not directly imputable to EffeUno.
The appliance must be repaired exclusively from staff authorized by EffeUno; the eventual reparation made by non-authorized staff will decay the
GUARANTEE. The repairs have to be carried out by one of the Assistance Technical Centers authorized by EffeUno. In case a defect of conformity in
the EffeUno product has to be manifested after the sixth month from the delivery, the final user that has the right to the guarantee to the senses of the
above mentioned laws will have to address to the retailer or, in alternative, to a Assistance Technical Centers authorized by EffeUno enclosing the
following documentation:
• Fiscal buying document, transport document or invoice.
• Proof that the damage can be considered a defect that the law classifies in the category " defects of conformity " .
• Proof that such defect is imputable to EffeUno.
In lack of what above mentioned, the restoration of the functionalities it will be executed under payment.
OVENS TECHNICAL SPECIFICATIONS
Working Tension: P134-P234-P150 220V-230V ~ 50/60Hz; P250 380V-400V 3P+N ~ 50/60Hz;
Electrical Power: P134H– 2450W ; P234H – 2650W o 3000W; P150H – 2600 o 3000W; P250H – 3900W o 4300W;
Timer: display one;
Wire length: 1,65 m lenght for P134 , P234 and P150; for P250 not available, we suggest in this case to use 3P+N 16A plug and 5x1,5 mmq cable;
External dimensions (W x P x H) mm: P134 535x265x585 P234 535x345x585 P150 685x265x685 P250 685x345x685
Baking room dimensions (W x P x H) mm: P134 350x90x410; P234 350x75x410 x 2 chambers; P150 500x90x510; P250 500x75x510 x 2 chambers;
Net weight: P134 23 Kg - P234 28 Kg - P150 30 Kg - P250 40 Kg
The manufacturer EffeUno S.r.l. reserves the right to make ELECTRICAL-TECHNICAL-ESTHETICAL changes on this device and / or replace parts
without prior notice, if considered more appropriate, in order to offer always a reliable, better, long-term and with advanced technology product
EC DECLARATION OF CONFORMITY
Messrs
EFFEUNO S.r.l. sole-associate
Via Dell’ Industria, 22
35010 Borgoricco – (Padova) Italy
Declare under their own responsibility that:
Name of product: Pizza Oven
Product code: P134H-P150H-P234H-P250H
Comply with Safety Standards as foreseen by European norms:
98/37/CE dated 22/06/98 (replacing nr 89/392/CEE - from DPR 459/96)
2004/108/CE dated 15/12/04 (replacing nr 89/336/CEE from D.Lgs 615/96)
2006/95/CE dated 12/12/06 (replacing nr 73/23/CEE from L. 791/77)
85/374/CEE dated 25/07/1985 (from DPR 224/88)
And comply with following Standards:
UNI EN 12100-1 April 2005
UNI EN 12100-2 April 2005
CEI EN 60204-1 4th Ed. 2006
CEI EN 60335-1 July 2008
particular norm: CEI EN 60335-2-36
Padova, 01-01-2015
(place and date)
(name and signature of authorized personnel))
To Previous Page
Loading...