Do not use electric wheelchairs on sandy or soft ground.
Avoid driving on slopes greater than 8 degrees or over obstacles greater
than 4 cm in height.
Do not disassemble or change parts of the electric wheelchair or replace
parts not manufactured by the manufacturer without manufacturer’s
permission.
This electric wheelchair meets the requirements of electromagnetic
compatibility of YY0505 and GB/T 18029.21 standards.
This is a Class A product. In a domestic environment, this product might
cause radio interference in which case the user might be required to take
adequate measures.
Except for approved items sold by the manufacturer, do not use
accessories or charging leads from 3rd party suppliers. This could result in
damage and will void the warranty of the electric wheelchair.
Warning. Should not be opened by non-professionals
High voltage
Type BF
Environmental protection
Level of water resistance
To Next Page
Loading...
