Before getting into an electric wheelchair,
please check the following:
Make sure the manual brake is working.
Make sure the battery is installed correctly.
Make sure the joystick is working.
After you get into the electric wheelchair, please fasten your seat belt first
then switch on the power by pushing the power button. The indicator light
will be ON and the joystick should be in the middle position.
The joystick controls the direction and speed at the same time, slowly
push the joystick towards the driving direction then the electric
wheelchair will start to move, push the joystick further away from you
and you will notice greater acceleration.
To stop the moving electric wheelchair, just release the joystick and use
the manual brake to park.
To Next Page
Loading...
