2
Warning
1. All work on this product must be carried out by qualified personnel. To
reduce the risk of electric shock, do not perform any servicing other than
that specified in the operating instructions unless you are qualified to do so.
2. Read all instructions before commencing installation. For electrical work, follow all
local and national wiring standards, regulations, and these installation instructions.
All wiring should be in accordance with the National Electrical Code (NEC),
ANSI/NFPA 70.
3. The system can connect with the utility grid only if the utility provider permits.
Consult with your utility and your local AHJ before installing this product for any
additional permits, regulations, and requirements for your area.
4. The installer should consider the safety of future users when choosing the
system’s correct position and location as specified in this manual.
5. Please keep children away from touching or misusing the components in the
system.
6. Never operate the system with the protective front covers removed.
DISCLAIMER
EG4® reserves the right to make changes to the material herein at any time without notice. You
may refer to the EG4® website at www.eg4electronics.com for the most updated version of our
manual.
To Next Page
Loading...
Need help?
General
