ride-on-board
Instructions for assembly and use
IMPORTANT: KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
To assemble the egg ride-on-board follow the step-by-step instructions below.
Check you have all listed parts. Do not use if any part is broken or missing.
Care & Maintenance / Warranty
Periodically remove the wheel units and lubricate the axle stubs. Use warm water and a soft cloth to clean non metal
parts,dry thoroughly. Your warranty is effective for 24 months from the date of purchase for the original purchaser/
owner. Proof of purchase will be required in order for your retailer to claim on the warranty. The warranty excludes any
fault caused by misuse,damage or neglect. It is the users responsibility to undertake routine inspection & maintenance
of the product in order to avoid damage to the product and/or injury to the child. The product is returned to the
retailer at the owners expense in order to ascertain if a claim under the warranty is justified,this does not affect your
statutory rights.
IMPORTANT SAFETY INFORMATION
The egg ride-on-board is intended for use for one child at a time from approximately 2
years to 20kg, Do not overload.
WARNING: Do not leave your child unattended.
WARNING: Never use the stroller on steps or stairs or escalators.
WARNING: Always descend kerbs rear wheels first and never climb or descend a kerb
without first folding the ride-on-board into its locked position (step seven below).
WARNING: Do not let your child play with this product.
Do not use if any part is broken or missing.
Make sure the child is standing with both feet centrally on the platform surface.
Always check the ride-on-board is securely fitted before use.
WARNING: Children must wear a helmet whilst using the optional Ride-on-board seat.
To Next Page
Need help?
General