Eglo 96452 - User Manual

Welcome to use 96452/96454 infrared motion sensor!
The product adopts good sensitivity detector and integrated circuit. It combines automation,
convenience, safety, energy-efficience and practical functions. It utilizes the infrared energy from
humans as control-signal source and it can start the load at once when one enters the detection
field. It can identify day and night automatically. It is easy to install and used widely.
SPECIFICATION:
Power Source: 220-240V/AC Detection Range: 180°
Power Frequency: 50/60Hz Detection Distance: 12m max(<24C°)
Ambient Light: <3-2000LUX (adjustable) Working Temperature: -20~+40C°
Time Delay: Min.10sec±3sec Working Humidity: <93%RH
Max.15min±2min Power Consumption: approx 0.5W
Rated Load: Max.1200W Installation Height: 1.8-2.5m
300W Detection Moving Speed: 0.6-1.5m/s
FUNCTION:
• Can identify day and night: The consumer can adjust working state in different ambient light. It
can work in the daytime and at night when it is adjusted on the “sun” position (max). It can work
in the ambient light less than 3LUX when it is adjusted on the “3” position (min). As for the ad-
justment pattern, please refer to the testing pattern.
• Time-Delay is added continually: When it receives the second induction signals within the first
induction, it will restart to time from that moment.
Good sensitivity Poor sensitivity
INSTALLATION ADVICE:
Since the detector responds to changes in temperature, avoid the following situations:
• Avoid pointing the detector towards objects with highly reflective surfaces, such as mirrors etc.
• Avoid mounting the detector near heat sources, such as heating vents, air conditioning units,
light etc.
• Avoid pointing the detector towards objects that may move in the wind, such as curtains, tall
plants etc.
96452/96454
Infrared Motion Sensor
Instruction Manual
OPEN
1
2
3
96452/96454
L' NL
96452_96454_bda.indd 1 27.12.2016 10:38:49

Summary

Specifications

Power Source and Specifications

Details on power supply voltage, frequency, consumption, and load rating.

Detection Capabilities

Covers detection range, distance, moving speed, and installation height.

Environmental and Time Settings

Information on ambient light, time delay, working temperature, and humidity.

Functions

Day and Night Identification

Adjustable working state based on ambient light levels for day/night operation.

Continuous Time-Delay

Restarting the time delay when new induction signals are received within the first induction.

Installation Advice

Installation Precautions

Avoid pointing at reflective surfaces, heat sources, or moving objects like curtains.

Safety Warnings and Installation Steps

Electrical Safety Warning

Danger of death through electric shock; must be installed by a professional electrician.

Mounting and Wiring

Steps for connecting wires, mounting the base, and installing the sensor.

Testing and Troubleshooting

Test Procedure

Steps for testing sensor functionality with TIME and LUX knobs.

Daylight Testing Note

Instruction to turn LUX knob to sun position for testing in daylight.

Common Problems and Solutions

Troubleshooting for load not working, poor sensitivity, and sensor not shutting off.

Eglo 96452 Specifications

General

Model	96452
Brand	Eglo
Category	Accessories
Material	Steel
Color	Black