What to do if my Ego Power+ Battery Charger doesn’t work and #3 LED shines red?
If your Ego Power+ Battery Charger's #3 LED shines red, it indicates that the battery pack is either too hot or too cold. Allow the battery pack to reach a normal temperature between 37°F (3°C) and 135°F (57°C). Charging will automatically begin once the battery pack is within this temperature range.
Why is my Ego Power+ CHX5500 Battery Charger not working and #3 LED flashes red or all LEDs turn off?
If your Ego Power+ Battery Charger isn't working and the #3 LED flashes red, or all LEDs turn off, the issue might stem from a defective battery pack or charger, or a poor connection between them. Here are a few things you can try: * Remove and reinsert the battery plug into the charger to ensure a secure connection. * Try charging a different battery pack to rule out a faulty battery. * Unplug the charger, wait at least 30 seconds until all LEDs turn off, and then reconnect it to the electrical outlet. This can help reset the charger.
Step-by-step guide on connecting the charger and battery for charging.
General| Brand | Ego Power+ |
|---|---|
| Model | CHX5500 |
| Category | Battery Charger |
| Language | English |
To Next Page
