56V LITHIUM-ION BACKPACK LINK — BH100112
7. Insert the plug into the adaptor
(Fig.10).
8. Insert the adaptor into the EGO tool’s
battery receptacle.
9. Follow the instructions in the tool’s
operator’s manual to start the tool.
10. After nishing work, remove the
adaptor from the tool and then pull
the plug out of the adaptor. Hang the
plug on the hook (Fig. 11).
WARNING:
In the event of any
emergency or safety concern, immediately
release the chest buckle and remove the
backpack link.
10
Adaptor
Plug
11
To Next Page
Loading...
Need help?
General
