To Next Page

To Previous Page

Step 2: .

Using an e-liquid bottle or syringe, fill the CE4 cartomizer by inserting e-liquid down the side wall

(Do not fill e-liquid in the center hole, that is for air flow).

Step 3: Screw the inhaler tip back onto the CE4 clearomiser (do not screw too tightly).

Step 4: Screw and connect the eGo CE4 cartomizer with the eGo battery, then they will be

stand-by state.

* The eGo ce4 e-cigarette works only when you press the eGo LED button. Press the LED button

and inhale at the same time.

Charge the eGo-C battery:

You just screw the eGo battery with the USB charger, then plug it into the PC or AC-USB Adapter.

Questions and Answers:

Need help?

Do you have a question about the EGO CE4 and is the answer not in the manual?

EGO CE4 Specifications

General