EGO CE4 User Manual

eGo-CE4 Manual
www.novocig.com
The eGo-CE4 e-cigarette is new generation of eGo tank e-cigarette with new technology of 1.6ml
transparent CE4 Plug cartomizer(eGo CE4+ Clearomizer). CE4 Plus cartomizer is the latest
Clearomizer designed to work with eGo Series batteries:
1) Easy to fill the e-liquid. Just take off the CE4 cartomizer inhaler tip, fill the e-liquid, and
then screw back the inhaler tip onto the eGo CE4 cartomizer.
2) Huge capacity, eGo ce4 cartomizer can hold about 1.6ml of E-liquid.
3) Fits nicely on an eGo giving a clean finished look.
4) With scale on the eGo CE4 transparent clearomizer, you can see how much nicotine you
inhaled.
5) Longer wicks for more consistent flow of e-liquid to the coil in any position
6) No burning, no leaking. Very large vapor.
7) Large capacity batteries, the average to heavy user can get 6 to 8 hours of use from a fully
eGo charged battery (MEGA battery is 1100mAh, enables over 14 hours).
I.Package:
An eGo-CE4 starter kit includes:
* 2 eGo CE4+ clear cartomizers
* 2 eGo batteries
* 1 AC-USB adapter
* 1 eGo USB charger
How to use eGo CE4 plug e-cigarette.
Step 1: Unscrew the inhaler tip from the CE4 cartomizer

EGO CE4 Specifications

General

Brand	EGO
Model	CE4
Category	Electronic Cigarettes
Language	English

Summary

eGo-CE4 Product Features

Easy E-liquid Filling

Simple process to fill e-liquid by removing and reattaching the inhaler tip.

Large E-liquid Capacity

The eGo CE4 cartomizer holds approximately 1.6ml of e-liquid.

Consistent Vapor Production

Features longer wicks for consistent e-liquid flow and large vapor production.

Long Battery Life

eGo batteries offer 6-8 hours of use; MEGA battery (1100mAh) offers over 14 hours.

How to Use eGo CE4 E-cigarette

Step 1: Unscrew Inhaler Tip

Begin by unscrewing the inhaler tip from the CE4 cartomizer.

Step 2: Fill E-liquid

Fill the CE4 cartomizer with e-liquid down the side wall, avoiding the center hole.

Step 3: Reattach Inhaler Tip

Screw the inhaler tip back onto the CE4 clearomiser, ensuring it is not too tight.

Step 4: Connect Cartomizer to Battery

Screw and connect the eGo CE4 cartomizer with the eGo battery to reach stand-by state.

Operation Guide

Press the eGo LED button and inhale simultaneously for operation.

Charging the eGo-C Battery

Charging Procedure

Initial charge for 8 hours, then use for 20 mins. Charge for 1 hour. Normal charge is 3 hours.