CULTIVATOR ATTACHMENT — CTA9500/CTA9500-FC14
WARNING:
Never operate the tool without the guard rmly in place. The guard
must always be on the tool to protect the user.
END CAP
Protects shaft from the intrusion of dirt and debris when the cultivator is not in use.
GUARD
Reduces the risk of injury from foreign objects that are ung backwards toward the
operator and from contact with the blades.
HITCH PIN
Secures the blades and simplies removal and installation of the blades.
SLEEVES
Four sleeves help to prevent or reduce grass intertwining on the drive shaft.
INNER BLADES
Metal blades with curved tines facing in two directions.
OUTER BLADES
Metal blades with curved tines all facing in the same direction.
HEX WRENCH
To lock/unlock the hex head screw of the guard or the blades.
To Next Page
Loading...
General