56 VOLT LITHIUM-ION CORDLESS MOWER — LM2010E/LM2010E-SP10
EN
SERVICE
WARNING: Grass bag components, the discharge
cover, side discharge chute, mulching insert and trailing
shield are subject to wear and damage, which could expose
moving parts or allow objects to be thrown and could
increase the risk of injury. For safety protection, frequently
check all components and replace damaged components
immediately with identical replacement parts, listed in this
manual. Contact EGO Customer Service or your closest
EGO service center, and repairs or replacements shall be
performed by a qualied service technician!
č If the mower’s built-in overload protection switch
frequently trips, contact EGO Customer Service or your
closest EGO service center.
č Do not wash the mower with a hose; avoid getting
water in the motor and electrical connections.
č Remove the key and store the idle lawn mower indoors
when not in use. Allow the motor to cool before storing
it in any enclosure. The lawn mower should be stored
in a dry, high, or locked-up enclosure, out of reach of
children.
č When servicing, use only identical replacement parts
listed in this manual. Use of parts that do not meet the
original equipment specications may lead to improper
performance and compromised safety.
č Remove or disconnect the battery pack before servicing,
cleaning, or removing material from the lawn mower.
č Follow instructions for lubricating and changing
accessories.
č Keep handles dry, clean and free from oil and grease.
č To reduce a re hazard, keep the motor cover free of
grass, leaves and debris build-up.
č Check the blade and motor mounting bolts at frequent
intervals for proper tightness. Also, visually inspect the
blade for damage (e.g., bending, cracking and wear.).
Replace the blade only with the identical replacement
blade, listed in this manual.
č Maintain your mower with care – keep the mower
blade sharp and clean for the best and safest
performance. Mower blades are sharp and can cut.
Wrap the blade or wear gloves and use extra caution
when servicing it.
č Never remove or tamper with safety devices. Regularly
check their proper operation. Never do anything to
interfere with the intended function of a safety device
or to reduce the protection provided by a safety device.
č Always stop the motor before making adjustments to a
wheel or a cutting-height adjustment.
č After striking a foreign object, stop the motor, remove
the key, and thoroughly inspect the mower for any
damage. Repair the damage before operating the
mower.
č Maintain or replace safety and instruction labels,
as necessary. Contact EGO Customer Service or
your closest EGO service center, and repairs or
replacements shall be performed by a qualied service
technician!
č SAVE THESE INSTRUCTIONS. Refer to them frequently
and use them to instruct others who may use this tool.
If you lend this tool to someone else, also lend these
instructions to them to prevent misuse of the product
and possibly injury.
BATTERY USE AND CARE
č To preserve natural resources, please recycle or
dispose of batteries properly. This product contains
lithium-ion batteries. Local or national laws prohibit
disposal of lithium-ion batteries in ordinary rubbish.
Consult your local waste authority for information
regarding available recycling and/or disposal options.
č Upon removal of the battery pack for disposal or
recycling, cover the battery pack’s terminals with
heavy-duty adhesive tape. Do not attempt to destroy
or disassemble the battery pack or remove any of its
components. Lithium-Ion batteries, must be recycled
or disposed of properly. Also, never touch the terminals
with metal objects and/or body parts as a short circuit
may result. Keep away from children. Failure to comply
with these warnings could result in re and/or serious
injury.
č UNDER ABUSIVE CONDITIONS, LIQUID MAY BE
EJECTED FROM THE BATTERY; AVOID CONTACT. IF
CONTACT ACCIDENTALLY OCCURS, FLUSH WITH
WATER. IF LIQUID CONTACTS EYES, ADDITIONALLY
SEEK MEDICAL HELP. Liquid ejected from the battery
may cause irritation or burns.
SPECIFICATIONS
Model Number LM2010E
LM2010E-SP
Self Propel System No Yes
Voltage
56 V
56 V
No-Load Speed 3150 /min 3150 /min
Cutting Height 25-95 mm 25-95 mm
Cutting Height Positions 6 6
Deck Size 51 cm 51 cm
Cutting Width 50 cm 50 cm
To Next Page
Loading...
Need help?
General
