56 VOLT POWER INVERTER — PAD1500E6
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The power inverter stops working
during use.
Battery capacity is depleted.
The battery pack is too hot.
Charge the battery.
Cool the battery pack until its
temperature drops below 67°C.
Red LED light on the power button
flashes for 1 minute, then shuts off.
The device(s) you are powering
draws more than the rated output
of the ports.
Remove the device and reactivate
the power inverter.
Red LED light on the power button
shines for 1 minute, then shuts off.
The device is too hot. Cool the power inverter until its
temperature drops below 105°C.
To Next Page
Loading...
Need help?
General
