EGO SNT2100 User Manual

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2100 27
2. Turn the snow blower on its side
(Fig. 24).
3. To reduce the risk of injury, wear
gloves. Use a T20 Torx screwdriver
(not included) to remove the 5 Torx
screws (Fig. 24). Detach the worn
scraper bar from the snow blower
(Fig. 25).
4. Install the new scraper bar and
fasten it securely to the snow
blower with the 5 Torx screws
(Fig. 24).
25
24
Torx screw
Scraper Bar

EGO SNT2100 Specifications

General

Brand	EGO
Model	SNT2100
Category	Snow Blower
Language	English