To Next PageTo Next PageWhy is my EGO SNT2100-FC Snow Blower not starting?
If your EGO Snow Blower isn't starting, it could be due to a low battery charge or not pressing the safety button correctly. Ensure the battery is fully charged. Then, press the safety button and squeeze the bail switch to start the snow blower.
What to do if my EGO Snow Blower leaves a layer of snow on the ground?
If your EGO Snow Blower leaves a layer of snow on the ground after passing, the scraper bar might be worn. Consider replacing the scraper bar.
Why is the auger not turning on my EGO Snow Blower?
If the motor of your EGO Snow Blower is running, but the auger isn't turning, it's possible that the drive belt is worn or broken. Replacing the drive belt may resolve this issue.
What to do if my EGO SNT2100-FC leaves a layer of snow?
If your EGO Snow Blower leaves a layer of snow on the ground after passing, it's likely that the scraper bar is worn and needs replacing.
General| Power Source | Battery |
|---|---|
| Clearing Width | 21 inches |
| Clearing Depth | 13 inches |
| LED Lights | Yes |
| Throw Distance | Up to 35 feet |
| Intake Height | 13 inches |
| Variable Speed Auger | Yes |
| Brushless Motor | Yes |
| Battery Voltage | 56V |
| Auger Material | Steel |
| Run Time | 45 minutes |
| Battery Included | Yes |
| Charger Included | Yes |
| Warranty | 5 years |
