39
FIRST STEPS
AND GETTING STARTED
1. Mounting the stand
Remove the charger Allen key and stand from
the packaging.
Mount the stand by securing it in the designa-
ted metal socket on the front left of the scoo-
ter using the provided Allen key.
!
This Allen key must be secured
very tightly to prevent the stand from
becoming detached while driving.
2. Charge
Open the end cap.
Connect the charge cable with the socket
on the scooter and tighten the screw on the
socket to prevent the plug from falling out
accidentally.
Connect the charger to the power outlet.
1.
2.
FIRST STEPS AND GETTING STARTED
To Next Page
Loading...
