40
Charger LED display
The charger is charging when both LEDs are red. As soon as one of the LEDs turns
green, the charging process is complete. You can remove the mains plug and then
take the charger plug out of the scooter.
The charge status and charge cycles are indicated on the battery status display on
the speedometer. More information on the speedometer is outlined in the area
entitled “First steps”.
When used normally, the battery should not lose more than 20% of its capacity
within the first 600 charge cycles.
Only use the charger supplied to recharge the battery.
CAUTION
FIRST STEPS AND GETTING STARTED
To Next Page
Loading...
