EGT G 27-32 UP - Revision History

G 27-32 UP
Page 2 www.egt.com
Revision History
Version
Date
Changes
rev. 1.0
April 2019
An initial document version
rev. 1.1
June 2019
A new document version with the following changes:
• The block scheme of the machine is replaced on page 77;
• Two points are added: II.6. “Top Lamp Mounting” and II.7. “Topper General
Mounting” in Chapter II. Installation
rev. 1.2
June 2019
A new document version with the following changes:
• The cabinet dimensions are changed on page 9.
rev. 3.0
February 2023
A new document version with the following changes:
• A new opportunity that the gaming machine can work with an Exciter IV
gaming platform and a description of the new platform is added.
• The chapter Modular Diagrams of Components is updated.
• The chapter Connectors of the Backplane Board is updated.
• New bill validator models that the machine supports are added.
• The models of Bill Validators and Ticket Printers, as well as their technical
characteristics, are listed in the Applications section.
The manufacturer shall reserve its right to make changes and amendments to the item and
documentation without prior notification of the customer.