English
19
an electrician if there are any questions or
problems.
‧ In the event of water leakage or when the
residual current protection device is triggered,
immediately disconnect all devices in the
aquarium from the power supply.
‧ If they are not being used, always disconnect
all devices in the aquarium from the power
supply before you install/remove any parts
and before all cleaning and maintenance
work.
‧ Protect the mains socket and mains plug
against moisture. It is recommended to form a
drip loop with the mains cable to prevent any
water running along the cable to the mains
socket.
‧ The electrical data of the appliance must
match the data of the power mains. This data
is found on the type plate, the packaging and
in these instructions.
To Next Page
Loading...
