Ei Electronics Ei208W - Page 30

30
000
Standby
Normal Operation
Button Te st (No faults)
Low Battery
Sensor Fault
Replace Alarm
Table D: Indicator Summary
Red LED
(Alarm) (Fault) (Power)
Yellow LED Green LED
Sounder LCD Display Action
End of Life (EOL)
Replace Alarm
Power Up Flash all icons
Button Te st (Fault)
Flashes as per
fault mode
Beeps as per
fault mode
As per fault mode
Alarm detecting CO
- Alarm Hush
Flashes as
per table B
ON or OFF depending
on ppm level and
duration of detection
PPM level and
either ventilate or
evacuate icon
See Ta ble B
for details
Flashes as
per table B
PPM level and
evacuate icon
- Low Battery fault hush
- Sensor Fault hush
- End of Life (EOL) fault hush
Alarm activated via RF interconnect
Fault Mode
See fault mode
x 1 x 1
x 1
x 1/min
x 1/sec
x 4min
x 1/48sec
x 1/48sec
x 2/48sec
x 2/48sec
x 3/48sec
x 3/48sec
x 1/48sec
x 2/48sec
x 3/48sec
x 12h
x 12h
x 24h
= LED Flashing
= Alarm
= Beep
Replace Alarm