LOCATE - If alarms sound press Locate to allow source of alarm to be identified audibly.
HUSH - Press Hush to silence nuisance alarms.
TEST - Operate weekly to Test the alarms.
MAINS CHECK - Test will not work with mains absent.
RadioLINK Base Ei168RC:
RadioLINK Bases are used to eliminate interconnect wiring and instead interconnect
alarms using radio signals. This allows quick and easy installation as well as easy
extension at a later date. The Ei2110 Multi-Sensor Fire Alarm (and Ei160RC Series
Alarms) simply slide on to the Ei168RC RadioLINK Base. Each alarm in the system
would need to be mounted on a RadioLINK Base.
An Ei411H RadioLINK Remote Control Switch is also available that offers additional
control functions similar to the Ei1529RC covered on page 25.
26
To Next Page
Loading...
