Ei Electronics Ei450 User Manual

1. Overview
Congratulations on purchasing the Ei450 single button alarm controller for RadioLINK Fire and Carbon
Monoxide (CO) Alarm systems. The Ei450 tests and controls fire, CO and hybrid (Fire + CO) RadioLINK
Alarm systems.
(L֜FRQWUROOHUIXQFWLRQDOLW\
Function Description
Remote Test All the Alarms can be tested from a centralised location
Some older revisions of our RadioLINK modules do not support the Memory ID function. Check this page on our website for a complete and
accurate list of products that support this function.
Remote Locate This will silence all the Alarms in the system except the one sensing Fire or CO
Remote Silence This will silence all the Alarms in the system
Fire Indicator Indicates a that a Fire Alarm has been activated
CO Indicator Indicates a that a CO Alarm has been activated
EOL Indicator Indicates that the battery has reached its end of life (EOL)
Memory Indicates if a Fire or CO Alarm has been previously activated
Memory ID Identifies the Alarm that has previously been activated
3

Ei Electronics Ei450 Specifications

General

Brand	Ei Electronics
Model	Ei450
Category	Controller
Language	English