Ei Electronics Ei450 User Manual

Instruction Manual
Read and retain carefully for as long as the product is being used. It contains vital information on the operation and installation of your Smoke Alarm.
The leaflet should be regarded as part of the product.
If you are just installing the unit, the leaftet must be given to the householder. The leaflet is to be given to any subsequent user.
Model: Ei450
Alarm Controller
Fire and CO

Ei Electronics Ei450 Specifications

General

End of Life Indicator	Yes
Alarm Sound Level	85dB at 3m
Operating Temperature	0°C to 40°C
Operating Humidity	15% to 95% RH
Standards	EN 50291

Summary

Overview

Ei450 i-controller functionality

Details the functions of the Ei450 controller, including test, locate, silence, and indicator functions.

Installation

House Coding

Operation

Testing the alarm system

Explains the guidelines and best practices for regularly testing the alarm system.

When the alarm system sounds

Provides immediate actions to take when the fire or CO alarm system sounds.

Locate the source Alarm(s)

Describes how to identify the specific alarm device that has triggered the system.

Fire Memory

Details how to identify a fire alarm that was previously activated, including false alarms.

CO Memory

Explains how to identify a CO alarm that was previously activated, including incidents when the house was not occupied.

System Diagnostics

Remote Testing – Walk round test (optional)

Describes an optional walk-around test to verify system functionality remotely.

System Diagnostic Mode

Explains how to enter a special diagnostic mode for advanced system testing.

Enter and Exit diagnostic mode

Details the steps to manually enter and exit the system diagnostic mode.

Two minute - Long Test

Describes a two-minute long test as an alternative to the walk-round test.

Alarm Identification Test

Explains how to perform a test to identify previously activated alarms.

Erase alarm memory

Provides instructions on how to clear the alarm identification memory.

Guarantee

Troubleshooting the RadioLINK

Limitations of Radio Communications

Technical Specification

Getting the Ei450 Serviced