To Next PageTo Next Page
Need help?Do you have a question about the EIBENSTOCK ELS 225.1 and is the answer not in the manual?
General| Brand | EIBENSTOCK |
|---|---|
| Model | ELS 225.1 |
| Category | Sander |
| Language | English |
Identifies the ELS 225.1 as a product of EIBENSTOCK Elektrowerkzeuge.
Important instructions and warning notices are on the machine by means of symbols.
During work you should wear goggles, ear protectors, dust mask, protective gloves and sturdy work clothes.
Lists items included in the ELS 225.1 starter kit.
Lists optional accessories for the ELS 225.1 sander with their order numbers.
The ELS 225.1 is designed for sanding drywall, ceilings, walls, insulation, and removing residue.
Check connection cable, avoid humid environments, and do not use for roughing or brushing.
Sudden reaction to jamming or catching of rotating accessory. Avoid kickbacks by following measures.
Do not use excessively large discs, observe specifications, avoid hazards.
Be aware of explosive/toxic dusts, lead paint, wood, metal. Do not use asbestos. Use P2 mask.
Check voltage/frequency, use sufficient cross-section extension cables. Ensure machine is switched off.
Use on/off switch for starting and stopping. Press switch to 0 to prevent unintentional restart.
The ELS 225.1 has an adjustment wheel for stepless speed adjustment between 1050 and 1600 min-1.
Disconnect plug before work. Use original accessories. Ensure extraction holes are clear.
Instructions for replacing the rubber foam pad and base plate using tools.
Use industrial vacuum cleaner for harmful dust. Connect to dust hood nozzles for optimal extraction.
Connect vacuum cleaner, switch on. Hold with both hands, move linearly/rotary. Avoid excessive pressure.
Adjust controller for suction force. Start low, increase until application pressure changes. Use extension tube for high areas.
Protects user, motor, and tool from overload via automatic switch-off.
Keep tool and vents clean. Check for particles. Repairs by qualified personnel only.
Instructions for replacing the flexible drive shaft using locking pins.
Tool packaging and components are made of recyclable materials for environmentally friendly disposal.
Do not dispose of electric tools with household waste. Collect separately for recycling.
Measured sound pressure (79 dB(A)) and sound power (90 dB(A)) levels according to EN 60745.
Vibration emission value (0.8 m/s²) and uncertainty (0.1 m/s²) determined according to EN 60745.
12 months warranty for defects. Excludes wear, overstressing, improper handling. Complaints to authorized centers.
Declaration that the product conforms to standards and directives.
