The entire schematic on 1 long page appears on the following page.
It is followed by three 8.5x11” pages which are the same schematic divided into 3 pieces,
so it could be printed on three 8.5x11” pages and then taped together. This is just a
convenience for those who do not have the ability to print the entire schematic on a single
large sheet of paper.
It is not known whether the penciled-in mark-ups on the schematic and parts list are
accurate for all versions of the Eico 753 or only certain serial numbers. They were on the
manual when I received it.
To Next Page
Loading...