Need help?Do you have a question about the Eico HF-20 and is the answer not in the manual?
General| Type | Tube Amplifier |
|---|---|
| Power Output | 20 watts |
| Output Impedance | 4, 8, 16 ohms |
| Dimensions | 15.5 x 10 x 6.5 inches |
| Weight | 35 lbs |
| Total Harmonic Distortion (THD) | 1% |
| Frequency Response | 20 Hz to 20 kHz |
| Input Impedance | 500k Ohms |
| Tubes Used | 12AX7 |
| Inputs | Phono, Tuner, Aux |
| Outputs | Speaker terminals, Tape output |
| Tubes | 6L6GC, 12AX7, 12AU7 |
Details the low-distortion preamp-equalizer circuit with feedback equalization for various recording curves.
Explains the Ultra-Linear Williamson type power amplifier and its 25-watt output transformer.
Covers ventilation, control access, parts accessibility, and acoustical isolation for proper setup.
Guides users on connecting speakers, phono inputs, and high-level sources to the amplifier.
Instructions for operating the amplifier with various sources like phonograph, tuner, and tape recorder.
Explains the function and adjustment of bass, treble, and loudness controls for optimal sound.
Covers routine maintenance, including tube replacement and troubleshooting tips.
Lists common symptoms, their causes, and remedies for diagnosing amplifier issues.
Offers advice on component identification, soldering techniques, and wiring practices.
Details the step-by-step process for assembling the main chassis and performing preliminary wiring.
To Next Page
