Eilon Engineering Ltd. RON 2501 NG Operating Manual 16
KG = Kg
M. TON = Metric tons
S. TON = Short tons
Press: ENTER.
The display will blink the new selected units, and then it will blink O.K. and
then UNITS again.
To select another procedure in the menu use the up and/or down arrows.
To quit the menu press ESC.
8.3 TIME – ADJUSTING (only if the system includes the “real time clock”
option)
To enter the programming procedure menu options follow the instructions in
chapter #8.
Select the TIME procedure by using the up and/or down arrows.
Press: ENTER
Display: YEAR
Press: ENTER
Display: 2000
With the two rightmost digits blinking, select the correct year by using the up
and/or down arrows.
Press: ENTER
Display: O.K. (blinking) and then MONTH is displayed.
Press: ENTER…..
The procedure continues until the minute selection is completed.
To quit the “TIME” procedure, press: ESC and return the main menu. To exit
the menu press: ESC. To enter another procedure, use the arrows.
8.4 RS-232 COMMUNICATION DATA – if applicable
Possible baud rates 1200 2400 4800 9600 19200 38400.
Default = 9600 b.p.s.
Length: 8 bits
Stop bits: 1 bit
Paring bit: none
To Next Page
Loading...
