Eilon Engineering Ltd. RON 2501 NG Operating Manual 25
Display: 01 + + means L.C. 01 is active
01 - - means L.C. 01 is closed
To change from “active” to closed or the other way round.
Press: ZERO. The display will show the new category (+ +) or (- -)
To move to the next load cell press: TARE or MAX
In this way you can change any of the load cells to be active or closed. To
quit:
Press: ENTER
Display: ID
Press: ESC
Display: OK and returns to measuring mode
8.13.2 CALIBRATION
The calibration is done according to Chapter 7. Calibration for each of the
load cells is done separately. In order to calibrate a specific load cell,
“close” all the other load cells that are specified in your system. After
completing the calibration, do not forget to reactivate the load cells that
you require.
To Next Page
Loading...
