5
GB
Important! To prevent damage and the risk of
fire, electrocution or injury, please read and
observe the following safety instructions before
using the polishing machine.
1. Safety instructions
앬 Use the polishing machine only in a clean and dry
environment.
앬 The polishing machine should be placed on the
polishing surface before being switched on or off.
앬 Keep children away by taking the appropriate pre
cautions.
앬 Avoid switching on the machine inadvertently.
앬 Do not keep your finger on the switch when
carrying the connected polishing machine from
one place to another.
앬 Always unplug at the mains before changing the
polishing cap or carrying out repairs.
앬 Never carry or pull the machine by its power
cable.
앬 Protect the cable from heat, oil and sharp edges.
앬 Check the cable for breaks before each use.
앬 Do not exert too much pressure when polishing,
but simply allow the polishing machine to glide
over the polishing surface.
앬 Check the housing and switch for damage.
앬 Do not use the polishing machine if the housing or
switch is defective.
앬 the A-weighted equivalent continuous sound
pressure level at the user’s ear lies below
70 dB(A).
앬 Repairs are to be carried out by qualified electrici
ans only.
2. Maintenance and care
앬 Wash the polishing cap only by hand and hang up
to dry.
앬 When not in use, remove the polishing cap and
store the polishing machine upside down so that
the polishing pad can dry and retains its original
shape.
앬 The excessive use of wax and paste can cause
the polishing cap to jump off the polishing pad
while polishing.
앬 Use only a mild soap and damp cloth to clean the
polishing cap.
Important! Do not use any abrasive polishing
agents!
3. Care tips
앬 For optimum paintwork protection, you should
polish your car 2 to 3 times a year.
앬 Wash your car at least every 2 weeks. Avoid using
household detergents as these can damage the
paintwork and remove the layer of wax.
앬 Wash your car with a clean sponge, working from
top to bottom.
앬 Remove all insects, bird droppings and tar stains
from the paintwork daily.
앬 If you use any window-cleaning agents, spray
them onto a cloth and not directly onto the
windows in order to prevent them wetting the
paintwork.
4. Technical data
Voltage: 230V ~ 50 Hz
Power rating: 120 W
Speed: 3000 rpm
Polishing pad: 240 mm dia.
Weight: 3.0 kg
Sound pressure level at the
workplace LPA: 64,6 dB(A)
Weighted harmonic value a
hw
: 12,251 m/s
2
Totally insulated 쓑
5. Instructions for use
When using wax and polishes, please observe
the manufacturers’ instructions.
Figure 1:
Pull the textile polishing cap over the polishing pad.
Make sure the polishing cap is completely clean.
Figure 2:
Spread the polishing paste evenly over the polishing
pad. Do not apply the polish directly to the polishing
surface.
Figure 3:
Switch the polishing machine on and off only when
the polishing machine is resting on the polishing sur-
face.
To Next Page
Loading...
