To Next PageTo Next PageWhat to do if the drive power falls on my EINHELL BG-MT 3360 LD Tiller?
If the drive power of your EINHELL Tiller is reduced, the clutch play might be too large. In this case, you should adjust the clutch cable. If the V-belt is loose, contact authorized customer service for assistance.
Why does my EINHELL BG-MT 3360 LD Tiller engine not start?
If your EINHELL Tiller's engine won't start, it could be due to several reasons. First, check that the throttle lever is in the correct position. A defective spark plug can also prevent the engine from starting, so consider replacing it. Ensure that the fuel tank isn't empty and, if it is, top it up. Finally, make sure the petrol cock is open to allow fuel flow.
What to do if my EINHELL BG-MT 3360 LD Tiller engine will not start or dies quickly?
If your EINHELL Tiller engine fails to start or dies shortly after starting, the spark plug may be fouled. Try cleaning or replacing the spark plug, ensuring the electrode spacing is 0.6 mm. Also, check the fuel level and top up the fuel if necessary.
How to fix an EINHELL BG-MT 3360 LD Tiller engine that doesn't run smoothly?
If your EINHELL Tiller engine isn't running smoothly, the air filter might be dirty; try cleaning it. Another potential cause is a soiled or defective spark plug, which may need cleaning or replacement.
Why does my EINHELL Tiller vibrate intensively and not operate smoothly?
If your EINHELL Tiller is vibrating intensively and not operating smoothly, check the bolts to ensure they are tightened. Also, a defective spark plug can cause this issue, so consider replacing it.
General| Working Width | 60 cm |
|---|---|
| Number of Tines | 4 |
| Fuel Type | Petrol |
| Tiller Blades | Yes |
| Wheels | Yes |
| Engine | 4-stroke OHV engine |
| Engine Type | 4-stroke gasoline engine |
General safety warnings and instructions for safe operation of the machine.
Meaning of symbols and warnings displayed on the machine for user awareness.
Detailed list and identification of all parts of the power cultivator.
Information on the correct and intended application of the machine.
Detailed technical specifications including engine, dimensions, and weight.
Step-by-step instructions for assembling and preparing the machine.
Instructions for starting the engine, adjusting depth, and operating controls.
Guidelines for cleaning the machine after use.
Procedures for air filter, spark plug, and oil checks.
Instructions for adjusting cables, information on gearing, and proper storage methods.
Information required for ordering replacement parts and where to find prices.
Guidelines for environmentally responsible disposal of the machine and packaging.
A guide to diagnosing and fixing common operational problems.
