To Next PageTo Next PageWhat to do if jump starting doesn't work with EINHELL CE-JS 18 Accessories?
If jump starting is not working, there are several possible causes: * The battery voltage may be too low, in which case you should charge the battery. * The connections on the vehicle may be connected with reverse polarity, so check the polarity and connect correctly. * The temperature may be outside the temperature range; try jump starting within the temperature range.
Why do all the LEDs flash on my EINHELL CE-JS 18?
If all the LEDs are flashing, this could be due to several reasons: * The overload cutout may have responded. In this case, switch off the equipment and check for possible overloading. * The equipment may be too cold or hot. Observe the equipment temperature range of +5°C to +40°C. * The ambient temperature may be too low or high. Observe the ambient temperature range of –15°C to +40°C.
General| Waterproof | No |
|---|---|
| Product color | Black, Red |
| Built-in flashlight | Yes |
| Charger compatibility | Universal |
| Number of simultaneously connected devices (max) | - |
| Charging time | 6 h |
| Charging source | Cigar lighter, DC, USB |
| Battery capacity | 18000 mAh |
| Lamp type | LED |
| Input voltage | 100 - 240 V |
| Output current | 1 A |
| Output voltage | 12 V |
| Port 1 output current | 2 A |
| Package depth | 250 mm |
| Package width | 265 mm |
| Package height | 62 mm |
| Package weight | 1480 g |
| Quantity per pack | 1 pc(s) |
| USB Type-A output ports | 2 |
| Cables included | USB |
| Number of adapters included | 8 pc(s) |
Weight and Dimensions| Weight | 700 g |
|---|
Essential safety precautions to prevent injuries and damage during equipment use.
Explanation of symbols and important text found on the equipment and jump start cable.
Detailed identification of all components and connection points on the jump start power bank.
Information on checking the completeness and condition of supplied accessories.
Details on the intended use of the jump start power bank and restrictions on commercial applications.
Comprehensive technical specifications including battery, input/output, and operating parameters.
Instructions and important notes for charging the jump start power bank using the provided charger.
How to check the remaining charge level of the integrated Li-Po battery using the LED indicators.
Instructions for operating the LED lamp as a flashlight, strobe, or SOS signal.
Guidance on charging USB devices using the 5V/2A and 5V/9V USB outlets.
How to connect and operate devices requiring 19V DC or 12V DC power.
Step-by-step instructions for safely jump starting a vehicle, including clamp connections and engine start.
Understanding the LED signals and acoustic warnings during the jump start process.
Procedures after the engine has successfully started, including clamp removal and battery charging.
Guidelines for cleaning the equipment safely and effectively, including recommended methods and precautions.
Information on internal maintenance and data required for ordering replacement parts.
Recommendation to seek professional inspection for issues beyond basic troubleshooting.
Instructions for environmentally friendly disposal of the equipment and packaging.
Guidelines for storing the equipment safely, including temperature and environmental conditions.
Diagnosing and resolving issues when the equipment fails to power on.
Troubleshooting common causes for jump starting failures, including polarity and temperature.
Interpreting the meaning of all LEDs flashing and the corresponding remedies for overload or temperature.
Information on wear parts, consumables, and guidelines for reporting equipment defects.
Details on warranty coverage, exclusions, validity period, and the process for making a guarantee claim.
