11
2. Pull the lamp socket out of the casing in the
energy station.
3. Remove the lamp carefully with a cloth pressing
the lamp carefully into the casing and twisting it
slightly anti-clockwise.
4. The lamp can now be removed. Take care not to
destroy the reflector.
5. To install the new lamp, proceed in reverse
order.
10 Maintenance and care
Be sure to switch off the energy station and
disconnect all cables from the unit whenever you
perform any cleaning or maintenance work.
As far as possible, use only a soft dry cloth
without any aggressive solvents to clean the
surface. If absolutely necessary, use a slightly
dampened rag to remove dirt.
11 Ordering spare parts
1. Please provide the following information if you
need any spare parts:
2. Type of unit
3. Article number of the unit
4. Identification number of the unit
5. Spare part number of the required spare part
GB
To Next Page
Loading...
