Do you have a question about the EINHELL GC-BC 25 AS and is the answer not in the manual?
Explains the meaning of warning signs displayed on the equipment.
Provides crucial safety advice and precautions for operating the equipment.
Details preparatory steps and checks required before starting equipment operation.
Illustrates and lists the main components and parts of the equipment.
Lists all accessories and parts supplied with the main equipment unit.
Describes the intended and safe application of the petrol power scythe.
Presents technical data regarding the acoustic pressure and vibration emissions.
Guides on fitting the steady grip and long handle for proper ergonomics.
Instructions for installing blade guards, cutting blade, and line spool.
Instructions on adjusting the equipment's cutting height for optimal use.
Lists essential checks to perform on the equipment before starting the engine.
Details the correct fuel and oil mixture ratio and procedure for the engine.
Provides step-by-step instructions for starting the engine from a cold state.
Provides step-by-step instructions for starting the engine when it is already warm.
Explains normal and emergency procedures for stopping the engine.
Offers advice for efficient and safe operation of the equipment.
Introduces various methods for cutting grass and weeds, including trimming and mowing.
Details techniques for cutting along fences, around trees, and on slopes.
Step-by-step guide for replacing the cutting line spool.
Instructions on how to maintain the sharpness of the safety hood blade.
Procedures for checking, cleaning, and maintaining the air filter.
Guidelines for checking, cleaning, and maintaining the spark plug.
Instructions for adjusting the throttle cable and setting the idling speed.
Specifies when and how to apply grease to the gear unit.
Guidelines for cleaning the equipment, long-term storage, and putting it back into operation.
Guidance on transporting the machine and information needed for ordering replacement parts.












Loading...