EINHELL GC-HH 9048 User Manual

GB
- 22 -
Ser vice information
We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Blade guide, Carbon brushes
Consumables* Blade
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Ple-
ase ensure that you provide a precise description of the problem and answer the following questions in
all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_GC_HH_9048_SPK7.indb 22Anl_GC_HH_9048_SPK7.indb 22 27.08.15 10:3627.08.15 10:36

EINHELL GC-HH 9048 Specifications

General

Blade size	480 mm
Blade type	Double blade
Stroke rate	2000 spm
Product color	Black, Red
Uncertainty K	1.5 m/s²
Sound power level	105 dB
Vibration emission	3.056 m/s²
Blade tooth spacing	20 mm
No-load stroke rate	1000 spm
Sound pressure level	90.22 dB
Cutting thickness (max)	15 mm
Engine power	900 W
Power source	AC
AC input voltage	230-240 V
AC input frequency	50 Hz

Weight and Dimensions

Weight	5100 g