GB
- 12 -
9. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
10. Troubleshooting guide
Fault Possible cause Remedy
The machine does not
work
- No power at the plug
- Machine is switched off
- Overload switch has tripped
- Ejector chute is blocked
- Loading funnel is not secure on
the motor housing
- Check the power cable and fuse
- Switch on machine
- Press control on overload switch
- Clean ejector chute
- Clean interior and tighten safety
screw
Shredding performance
unsatisfactory
- Blades worn - Turn, sharpen or replace blades
Anl_GC-KS_2540_UK_SPK7.indb 12Anl_GC-KS_2540_UK_SPK7.indb 12 19.02.2024 10:02:2519.02.2024 10:02:25
To Next Page
Loading...
