EINHELL GC-SA 1231 User Manual

GB
- 23 -
10. Troubleshooting guide
Fault Possible causes Rectifi cation
Motor does not start a) No electricity in plug
b) Cable defective
c) Switch, switch/plug block
defective
d) Connections to motor or
capacitor disconnected
e) Housing clogged
a) Check line and fuse
b) Check
c) Have machine checked by a
customer service center
d) Have machine checked by a
customer service center
e) If necessary adjust working depth.
Clean housing so that the roller can
run freely
Engine performance
drops
a) Soil is too fi rm
b) Housing clogged
c) Roller badly worn
a) Change working depth
b) Clean housing
c) Replace roller
Imprecise scarifying
result
a) roller worn
b) Wrong working depth
a) Replace roller
b) Correct working depth
Motor is running,
roller is not
rotating
a) Toothed belt is torn a) By customer service workshop
Important notice! To protect the motor itis equipped with a thermal overload switch which cuts
out when overloaded and starts again automatically after a short cooling-down period.
Anl_GC_SA_1231_SPK1.indb 23Anl_GC_SA_1231_SPK1.indb 23 24.05.16 10:2424.05.16 10:24

EINHELL GC-SA 1231 Specifications

General

Power	1200 W
Product color	Red
Working width	310 mm
Number of claws	42
Housing material	Plastic
Number of knives	8
Working depth (max)	- mm
Rear wheels diameter	60 mm
Front wheels diameter	170 mm
Recommended lawn area	300 m²
Collection box capacity	28 L
Adjustable working depth	Yes
Number of working depth positions	3
AC input voltage	230 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	575 mm
Width	430 mm
Height	275 mm
Weight	9910 g
Package weight	11490 g