EINHELL GE-EC 720 T User Manual

22
GB
Cause Fault Remedy
Chainsaw does not work at all No power supply
Defective mains outlet
Power extension cable damaged
Defective fuse
Check the power supply
Try an alternative source of electrical
power, replace if necessary
Check the cable and replace as required
Replace the fuse
Chainsaw operates
intermittently
Power cable damaged
Loose connection (external)
Loose connection (internal)
ON/OFF switch defective
Consult a specialist workshop
Consult a specialist workshop
Consult a specialist workshop
Consult a specialist workshop
Saw chain dry No oil in the tank
Oil tank cap breather blocked
Oil outlet blocked
Fill up with oil
Clean the oil tank cap
Clear the oil outlet
Chain/guide rail hot No oil in the tank
Oil tank cap breather blocked
Oil outlet blocked
Blunt chain
Fill up with oil
Clean the oil tank cap
Clear the oil outlet
Re-sharpen or replace the chain
Chainsaw juddering, vibrating
or not sawing properly
Chain tension too loose
Blunt chain
Worn chain
Saw teeth pointing in the wrong
direction
Adjust the chain tension
Re-sharpen or replace the chain
Replace the chain
Reinstall the saw chain with the teeth
facing in the correct direction
Anleitung_GE_EC_720_T_SPK7__ 16.02.15 13:19 Seite 22

EINHELL GE-EC 720 T Specifications

General

Power source	-
Product color	Black, Red
Height adjustment	150 mm
Cutting diameter (max)	180 mm

Weight and Dimensions

Weight	4100 g