What to do if my EINHELL GE-SA 1335 P motor does not start?
If your EINHELL Lawn and Garden Equipment motor isn't starting, there are a few potential causes. First, ensure the engine start/stop lever is activated by pressing it. Another possible reason is a defective spark plug, which would need to be replaced. Lastly, check if the fuel tank is empty and top it up if necessary.
Why does my EINHELL GE-SA 1335 P Lawn and Garden Equipment engine not run smoothly?
An EINHELL Lawn and Garden Equipment engine might not run smoothly due to a dirty air filter, so you should clean it. Another cause could be a worn spark plug, in which case you should either clean or replace the spark plug.
How to fix EINHELL GE-SA 1335 P Lawn and Garden Equipment that vibrates intensively?
If your EINHELL Lawn and Garden Equipment doesn't operate smoothly and vibrates intensively, the cutting unit or aerator roller may be imbalanced. You should replace the cutting unit or aerator roller.
What to do if the motor is running, but the roller isn't rotating on my EINHELL Lawn and Garden Equipment?
If the motor is running but the roller isn't rotating on your EINHELL Lawn and Garden Equipment, the V-belt may be torn. Have the V-belt replaced by a customer service workshop.
Explains warning symbols and their meanings as shown in Fig. 14.
Step-by-step procedure for starting the petrol engine.
How to set the working depth for scarifying or aerating.
Covers oil, air filter, spark plug, roller maintenance, and ordering parts.
General| Brand | EINHELL |
|---|---|
| Model | GE-SA 1335 P |
| Category | Lawn and Garden Equipment |
| Language | English |
To Next Page