To Next PageTo Next PageWhy does my EINHELL Saw operate intermittently?
If your EINHELL Saw operates intermittently, it could be due to a loose connection, either external or internal, or a defective ON/OFF switch. In any of these cases, consult a specialist workshop for assistance.
Why is the chain/guide bar on my EINHELL Pole Saw hot?
If the chain or guide bar of your EINHELL Pole Saw is hot, it could be due to several reasons. First, check if there is enough oil in the tank and top it up if necessary. A blocked vent in the oil tank cap can also cause this issue, so clean the cap. Additionally, clear any blockage in the oil outlet. If these steps don't resolve the problem, the chain might be blunt and needs re-sharpening or replacement. Lastly, check the chain tension, as an overtensioned chain can also lead to overheating.
How to fix a dry saw chain on my EINHELL Pole Saw?
If your EINHELL Pole Saw chain is dry, there might be a few reasons. Start by checking the oil level in the tank and top it up if it's low. Also, the vent in the oil tank cap might be blocked, so try cleaning it. Finally, the oil outlet could be blocked, so clear it to ensure proper lubrication.
What to do if my EINHELL Pole Saw chain judders or doesn't saw properly?
If your EINHELL Pole Saw chain saw judders, vibrates, or does not saw properly, several issues could be the cause. Start by checking the chain tension and adjust it if it's undertensioned. The chain might also be blunt, requiring re-sharpening or replacement. If the chain is worn, replace it. Finally, ensure the saw teeth point in the correct direction; if not, refit the chain properly.
General| Power Source | Battery |
|---|---|
| Battery Voltage | 18 V |
| Cutting Width | 20 cm |
| Weight | 2.4 kg |
| Battery Type | Li-ion |
| Telescopic | Yes |
| Cutting Length | 20 cm |
Basic safety precautions for electric gardening appliances to reduce risks.
Safety measures for all electric gardening appliances.
Keep body parts away from the moving saw chain during operation.
Proper methods for carrying and transporting the pole pruner.
Hold by insulated surfaces to avoid electric shock.
Avoid using the pruner in bad weather or during lightning.
Maintain a safe distance from electrical power lines.
Always operate the pole pruner with two hands for control.
Use head protection when working overhead.
Explanation of the general warning symbol.
Symbols indicating required personal protective equipment.
Symbol for protecting the equipment from moisture.
Symbol indicating the maximum cutting length.
Symbol warning of electric shock hazard from power lines.
Symbol indicating the need to read operating instructions.
Symbol indicating the need for sturdy footwear.
Symbol warning of falling or catapulting parts.
Symbol indicating the need to maintain a safe distance.
Symbol showing chain movement and teeth direction.
Symbol indicating the need to wear safety gloves.
Diagram showing the layout of the product components.
Tips for minimizing noise and vibration during use.
Instructions for assembling the pole pruner components.
Instructions for assembling the cutter rail and saw chain.
Procedure for correctly tensioning the saw chain.
Instructions for filling the oil tank for chain lubrication.
Procedure for starting and stopping the pole pruner.
Steps to power on the equipment.
Steps to power off the equipment.
Essential checks before using the chainsaw mounting kit.
Inspect the chainsaw for damage before each use.
Ensure sufficient oil is present in the oil container.
Instructions for cleaning the pole pruner and its components.
Procedures for maintaining the equipment's functionality.
Maintenance for the chain saw mounting kit.
How to replace the cutter rail and saw chain.
Test to verify the automatic chain lubrication system.
Information on sharpening the saw chain for optimal performance.
How and where to order replacement parts.
Contact information for service and repairs.
Encourages product registration for better customer service.
Details what is covered under the product warranty.
Specifies who is eligible to receive warranty coverage.
Outlines what is not covered by the product warranty.
