Why my EINHELL GE-LC 36/35 Li won't start?
Your EINHELL Cordless Saw might not start due to a couple of reasons. First, check if the quick stop brake has been triggered; if so, pull the hand protection back to its normal position. Also, ensure the rechargeable battery has power.
What to do if my EINHELL GE-LC 36/35 Li chain/guide bar is hot?
If the chain or guide bar of your EINHELL Cordless Saw is getting hot, it could be due to several reasons: * Check if there is enough oil in the tank and top it up if needed. * Ensure the vent in the oil tank cap isn't blocked; clean it if it is. * Make sure the oil outlet is not blocked and clear it if necessary. * The chain might be blunt, in that case, re-sharpen or replace it.
How to fix a dry saw chain on my EINHELL GE-LC 36/35 Li?
If the saw chain on your EINHELL Cordless Saw is dry, it could be due to a few reasons: * Check if there is oil in the tank and top it up if needed. * The vent in the oil tank cap might be blocked, clean the oil tank cap. * The oil outlet could be blocked, clear the oil outlet.
What to do if EINHELL GE-LC 36/35 Li judders or doesn't saw properly?
If your EINHELL Cordless Saw is juddering, vibrating, or not sawing properly, consider the following: 1. Ensure the chain is properly tensioned and adjust if necessary. 2. Check if the chain is blunt and re-sharpen or replace it. 3. Inspect the chain for wear and replace if needed. 4. Verify that the saw teeth point in the correct direction and refit the chain if they don't.
Why does my EINHELL Cordless Saw operate intermittently?
Your EINHELL Cordless Saw might be operating intermittently due to a loose internal connection or a defective ON/OFF switch. It is advised to consult a specialist workshop.
What to do if chain brake doesn't work on EINHELL Cordless Saw?
If the chain brake on your EINHELL Cordless Saw isn't working, there might be a problem with the switch mechanism in the front hand guard. It is advised to consult a specialist workshop.
Guidelines for safe use of electrical power tools, focusing on outlets, cords, and grounding.
Emphasizes staying alert, using PPE, and preventing unintentional starts for operator protection.
Instructions for safe charging, use, and care of battery packs, including avoiding damage.
Precautions for safe handling, storage, and use of battery packs to prevent damage and hazards.
Understanding and avoiding kickback, a dangerous reaction from chainsaw misuse.
Instructions for starting and stopping the chainsaw using the main switch and safety lock-off.
Details on the function and importance of the motor brake and chain brake for operator safety.
Pre-operation checks including chainsaw condition, oil level, chain tension, and safety devices.
Guidance on planning escape routes, determining fall direction, and making felling cuts.
Detailed explanation of kickback, its causes, and how to prevent it during operation.
A guide to diagnosing and fixing common problems encountered with the chainsaw.
General| Power source | Battery |
|---|---|
| Chain speed | 15 m/s |
| Blade length | 350 mm |
| Product color | Black, Red |
| Cutting length | 330 mm |
| Automatic oiling | Yes |
| Oil tank capacity | 0.115 L |
| Master (outer) case width | 515 mm |
| Master (outer) case height | 275 mm |
| Master (outer) case length | 405 mm |
| Master (outer) case weight | 11500 g |
| Quantity per master (outer) case | 2 pc(s) |
| Battery included | No |
Weight and Dimensions| Weight | 4004 g |
|---|---|
| Package depth | 500 mm |
| Package width | 260 mm |
| Package height | 252 mm |
| Package weight | 5195 g |
To Next Page
