EINHELL GE-LS 18 Li User Manual

GB
- 21 -
10. Troubleshooting guide
Danger!
Before troubleshooting, switch off the equipment and remove the battery.
The table below contains a list of fault symptoms and explains what you can do to remedy the problem
if your equipment fails to work properly. If you fail to localize and solve the problem after working through
the list, please contact your nearest service workshop.
Fault Possible cause Remedy
The equipment
does not work
- Set the ON-OFF main switch to the
OFF position
- Battery empty
- Battery is not correctly inserted
- Set the ON-OFF main switch to ON
- Charge battery
- Remove battery and insert again
(see section 5.2)
The equipment
stops during cutting
- Akku leer
- Akkukapazität gering
- Charge battery
- Charge battery
The cutting blade
becomes jammed in
a thick branch
- Akkukapazität gering
- Holz zu hart
- Astdurchmesser zu groß
- Charge battery
- Wood is unsuitable for cutting
- Wood is unsuitable for cutting
The cut is not
smooth
- Cutting blade is blunt or worn - Replace cutting blade
Anl_GE_LS_18_Li_SPK9.indb 21Anl_GE_LS_18_Li_SPK9.indb 21 15.09.2020 09:40:0715.09.2020 09:40:07

EINHELL GE-LS 18 Li Specifications

General

Brand	EINHELL
Model	GE-LS 18 Li
Category	Power Tool
Language	English