EasyManua.ls Logo

EINHELL HRW 1901/1 - User Manual

EINHELL HRW 1901/1
44 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
®
Bedienungsanleitung
Hydraulischer Wagenheber
Directions for Use
Hydraulic Trolley Jack
Mode d’emploi
Cric rouleur hydrauliquer
Gebruiksaanwijzing
Hydraulische rangeerkrikr
Manual de instrucciones
Gato hidráulico para coches sobre rodillos
Manual de instruções
Macaco hidráulico de oficina
Bruksanvisning
Hydraulisk garagedomkraft
Käyttöohje
Hydraulinen hallinosturi
Bruksanvisning
Hydraulisk rangerjekk
Istruzioni per l’uso
Cric idraulico a rotelle r
Instrukcja obługi
jezdnego podnośnika hydraulicznego
Használati utasítás
Hidraulikus hajtható autóemelő
HRW 1901: Art.-Nr.: 20.117.75
I.-Nr.: 01023
HRW 199/2: Art.-Nr.: 20.117.25
I.-Nr.: 01010
PRH 2002: Art.-Nr.: 20.221.35
I.-Nr.: 01013
HRW 1901/1
HRW 199/2
PRH 2002
Anleitung HRW 1901-199 31032003 31.03.2003 11:51 Uhr Seite 1

Questions and Answers

  • J
    Jamie PalmerAug 5, 2025
    Why the hydraulic system of my EINHELL HRW 1901/1 Jacks cannot be extended to its full height?
    • J
      Joseph ElliottAug 5, 2025
      If the hydraulic system (piston) of your EINHELL jack cannot be extended to its full height, it's likely due to air in the system. To resolve this, open the vent plug and remove the air from the hydraulic system by pumping up and down several times as described in the instructions.
  • J
    Jacob PittsAug 14, 2025
    What to do if my EINHELL Jacks trolley jack cannot hold the load in raised position?
    • P
      Patricia MccannAug 14, 2025
      If your EINHELL trolley jack cannot hold the load in a raised position, it could be due to a hydraulic system clogged with dirt. First, close the lowering screw and then open the vent plug. Additionally, you can place your foot against a front wheel and pull up the jacking arm as far as it will go. If that doesn't work, lower the jacking arm and try again to raise the load.
  • L
    Laura BartonAug 26, 2025
    How to fix load cannot be raised with EINHELL HRW 1901/1 Jacks trolley jack?
    • I
      Ian BrowningAug 26, 2025
      If the load cannot be raised with your EINHELL trolley jack, tighten the screw clockwise. If that doesn't work, add more fluid as described in the instructions.

Summary

Technical Data

Safety Instructions

General Safety Precautions

Follow safety instructions before operation, ensure proper ground, never work under raised load supported only by jack.

Adding Hydraulic Fluid

Adding Hydraulic Fluid Procedure

Remove cover, use screwdriver to press plug, fill fluid to cover cylinder, re-insert plug.

Raising Vehicles

Raising Vehicles Safely

Ensure firm surface, pull hand brake, secure vehicle with chocks, place jack correctly.

Maintenance

Regular Maintenance Schedule

Oil joints, grease rollers every 3-6 months. Use acid-free fluid. Store piston in idle position.

Troubleshooting

Load Cannot Be Raised

Check lowering screw, fluid level, or system blockage. Tighten screw, add fluid, or vent system.

Load Not Held in Raised Position

Check lowering screw, fluid level, or air in system. Tighten screw, add fluid, or vent system.

Hydraulic System Cannot Extend Fully

Check fluid level or air in system. Add fluid or vent the hydraulic system.

Hydraulic System Cannot Be Fully Lowered

Check fluid level or air in system. Add fluid or vent the hydraulic system. Check return spring.

Declaration of Conformity

Product Compliance Standards

Declaration of conformity with EU directives and standards for HRW 1901/1, HRW 199/2, PRH 2002.

Warranty Information

Einhell Warranty Certificate

Guarantee period is 2 years from sales date for faulty construction, material, or functional defects.

EINHELL HRW 1901/1 Specifications

General IconGeneral
BrandEINHELL
ModelHRW 1901/1
CategoryJacks
LanguageEnglish