GB
- 16 -
11. Troubleshooting
•
The equipment does not start:
- Check whether the power plug has been
inserted properly.
- Is there a power failure?
- Is the red lamp of the water level indicator
lit? If it is, the water collector is full and must
be emptied or the collector is not inserted
properly.
- Do the room conditions lie within the opera-
ting range (see Technical Data)?
•
The equipment does not seem to be wor-
king:
- Is the fi lter soiled?
- Is the air supply line or exhaust line blo-
cked?
- Is the room’s humidity already very low?
•
The equipment seems to be working very
poorly:
- Are too many doors and windows open?
- Is something in the room producing too
much humidity?
•
The equipment is very loud:
- Is the equipment vibrating because it is not
standing squarely or is tilted?
- Is the fl oor uneven?
Important. Never try to repair the equipment
yourself. Contact your customer service
center.
Anl_LE_10_SPK7.indb 16Anl_LE_10_SPK7.indb 16 03.03.16 08:1403.03.16 08:14
To Next Page
Loading...
