앬 Never use spare parts and accessories
which are not provided or recommended by
the manufacturer.
앬 Pull out the mains plug before checking,
cleaning or doing any work on the machine
and when it is not being used.
앬 Use the machine only in broad daylight or
in well-lit conditions.
Please note: The nylon line continues to
rotate for a few seconds after the motor
is switched off.
2. Items supplied (see Fig. 1)
1 Grass trimmer
1 Additional handle (5)
1 Safety guard (8)
2 Skids (10)
1 Transparent safety hood (11)
1 Edge guide (12)
3. Description of the device
(see Fig. 1)
1. Upper Handle
2. ON/OFF switch
3. Button for rotating through 180°
4. Power cable
5. Additional handle
6. Height adjustment
7. Pedal für Neigungswinkelverstellung
8. Safety cover
9. Locking knob
10. Skids
11. Transparent guard hood
12. Edge guide
4. Explanation of the warning
sign (see Fig. 2)
Item 1: Warning!
Item 2: Wear eye protection!
Item 3: Protect from moisture!
Item 4: Read the instruction manual before
starting!
Item 5: Pull out the mains plug before
checking a damaged power cable!
Item 6: Keep other people out of the danger
area!
Item 7: The tool continues to run!
Item 8: Using the grass trimmer as an edge
trimmer
5. Technical data
Voltage: 230 V ~ 50 Hz
Performance 500 W
Cutting circle Ø 30 cm
Revolutions n
0
9500 rpm
Cutting line Ø 1.4 mm
Sound pressure level, L
pA
82 dB(A)
Sound power level, L
WA
96 dB(A)
Vibration a
hv
≤ 2.5 m/s
2
Weight 3.4 kg
The machine may exceed 85 dB (A). The
operator will require noise protection measures
if this is the case. The noise generated by this
machine was measured in accordance with EN
786.
The value of the vibrations emitted by the
handle was determined in compliance with EN
786.
6. Assembly
6.1 Assembling the edge guide, safety
cover and skids
앬 Insert the edge guide (12) into the openings
of the safety cover (8) (Fig. 3).
GB
18
To Next Page
Loading...
