EasyManua.ls Logo

EINHELL RT-PG 3250 - Page 18

EINHELL RT-PG 3250
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB
9. Troubleshooting
Fault Cause Remedy
Engine does not start Automatic oil cut-out has not
responded
Spark plug fouled
No fuel
Check oil level, top up engine oil
Clean or replace spark plug
(electrode spacing 0.6 mm)
Refuel / have the petrol cock
checked
Generator has too little or no
voltage
Controller or capacitor defective
Overcurrent circuit-breaker has
triggered
Air filter dirty
Contact your dealer
Actuate the circuit-breaker and
reduce the consumers
Clean or replace the filter
18
Anleitung_RT_PG_3250_SPK1:_ 02.04.2008 11:29 Uhr Seite 18

Related product manuals