To Next PageTo Next PageWhat to do if my EINHELL Portable Generator engine does not start?
If your EINHELL Portable Generator's engine isn't starting, it might be due to the automatic oil cut-out. Check the oil level and top it up with engine oil if needed. Another possible reason is that the generator is out of fuel, so refuel it.
Why does my EINHELL Portable Generator have no voltage?
If your EINHELL Portable Generator has too little or no voltage, the overcurrent circuit-breaker may have triggered. Actuate the circuit-breaker and reduce the number of connected devices. The air filter might also be dirty, so clean or replace it. If these steps don't resolve the issue, the controller or capacitor may be defective, and you should contact your dealer.
General| Brand | EINHELL |
|---|---|
| Model | STE 2500/1 |
| Category | Portable Generator |
| Language | English |
Displays the current fuel level in the generator's tank.
Provides access to the fuel tank for filling and maintenance.
Output ports for connecting 230-volt electrical devices.
Grounding point for enhanced electrical safety.
Protective device that interrupts power on overload.
Instrument showing the generator's output voltage.
Opening for adding engine oil to the generator.
Point for draining used engine oil.
Automatic shutdown mechanism for insufficient oil.
Controls engine starting and stopping via a key.
Adjusts engine's air-fuel mixture for starting.
Manual mechanism used to start the engine.
Controls the flow of fuel from the tank to the engine.
Step-by-step guide to start the generator's engine.
How to connect electrical devices to the generator.
Procedure for safely shutting down the generator.
Instructions for connecting the generator to earth for safety.
