To Next PageTo Next PageWhy my EINHELL Inverter engine does not start?
Your EINHELL Inverter engine might not be starting because:* The automatic oil cut-out hasn't responded: Check the oil level and top it up with engine oil.* There's no fuel: Refuel the generator.
What to do if my EINHELL Inverter generator has no voltage?
If your EINHELL Inverter generator has too little or no voltage, several factors could be responsible:1. A defective controller or capacitor: In this case, it is best to contact your dealer.2. The overcurrent circuit-breaker may have triggered: Try actuating the circuit-breaker and reduce the number of connected devices.3. A dirty air filter: Clean or replace the filter to resolve this.
What to do if my EINHELL STE 5500 Portable Generator engine does not start?
If your EINHELL Portable Generator's engine isn't starting, it might be due to the automatic oil cut-out. Check the oil level and top it up with engine oil if needed. Another possible reason is that the generator is out of fuel, so refuel it.
Why does my EINHELL STE 5500 Portable Generator have no voltage?
If your EINHELL Portable Generator has too little or no voltage, the overcurrent circuit-breaker may have triggered. Actuate the circuit-breaker and reduce the number of connected devices. The air filter might also be dirty, so clean or replace it. If these steps don't resolve the issue, the controller or capacitor may be defective, and you should contact your dealer.
General| Brand | EINHELL |
|---|---|
| Model | STE 5500 |
| Category | Portable Generator |
| Language | English |
Instructions on how to start the generator engine using the starter and choke lever.
Guidance on connecting electrical devices to the 230V and 400V sockets.
Procedure for safely shutting down the generator engine after use.
Instructions for performing oil changes and checking the oil level.
Steps for cleaning the air filter elements of the generator.
Identifies causes and remedies for the engine failing to start.
Troubleshooting steps for issues with generator voltage output.
