13
t
앬 The product meets the requirements of EN 61000-3-11 and is subject to special connection conditions. This means that
use of the product at any freely selectable connection point is not allowed.
앬 Given unfavorable conditions in the power supply the product can cause the voltage to fluctuate temporarily.
앬 The product is intended solely for use at connection points that
a) do not exceed a maximum permitted supply impedance “Z”, or
b) have a continuous current-carrying capacity of the mains of at least 100 A per phase.
앬 As the user, you are required to ensure, in consultation with your electric power company if necessary, that the
connection point at which you wish to operate the product meets one of the two requirements, a) or b), named above.
To Next Page
Loading...
Need help?
General