To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TE-DH 50 and is the answer not in the manual?
General| Drilling | - |
|---|---|
| Chuck type | SDS Plus |
| Product color | Black, Red |
| Hammer drilling | Yes |
| Rated speed (max) | 1800 RPM |
| Impact energy (max) | 50 J |
| Drilling diameter in concrete (max) | 30 mm |
| Cord length | 4 m |
| Input power | 1700 W |
| Power source | AC |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
Weight and Dimensions| Depth | 905 mm |
|---|---|
| Width | 400 mm |
| Height | 190 mm |
| Weight | 18390 g |
Overview of the product's physical components with numbered parts.
List of components included with the demolition hammer.
Instructions for attaching and positioning the auxiliary handle for safe operation.
Guide on how to correctly insert and remove chisels into the tool holder.
How to turn the demolition hammer on and off using the switch.
Advice on chisel sharpening for optimal results and longevity.
Instructions for cleaning the equipment to maintain performance.
Notes regarding carbon brushes and their proper handling.
Notes on internal maintenance requirements for the equipment.
Details on how to order replacement parts and accessories.
