EINHELL TE-LD 60 - Faults and Their Causes

GB
- 26 -
10. Faults and their causes
Err 10 Err 14 Err 15 Err 16
Possible cause
Battery level too low/fl at
Moving too fast during
measuring
Outside range:
<0.05 m or > 60 m
Signal too weak / measuring
time too long
Remedy
Replace old batteries with
new ones
Keep the equipment still while
measuring
Perform measurements within
range
(0.05 - 60 m)
Increase the surface
refl ection,
e.g. with a sheet of white
paper
Anl_TE_LD_60_SPK9_1.indb 26Anl_TE_LD_60_SPK9_1.indb 26 22.04.2021 10:54:5822.04.2021 10:54:58